As the body of a ceiling pull-up bar (Part 6 of 10)

!±8± As the body of a ceiling pull-up bar (Part 6 of 10)

This video shows me on the design and construction of a pull-up bar from scratch. Now I have a bar that shows no signs of stress or weakness in the 200 pounds of torque from the realization of two men pull up. The bar can probably support two people almost all the weight. The cost for parts is about $ 70 - $ 80, but you'll probably need to invest money to expand your toolbox. To properly design and install a permanent bar from the ground up to me seven days and several trips to the store. With theseInstructions, you should be able to complete within 1-3 days. Since this was my first attempt was a learning process for me. As a result I have several adjustments to my choices of materials and tools, in particular the size drill bit on the road. These adjustments show my learning process and are a good example of how you should proceed slowly and carefully to this project because it is the risk of large errors, such as beam splitting or injury from a bar, which isweak or unstable. Please take over, I am not responsible for damages or injuries that may result from the decision to use these plans occur. As a result of these changes in materials and tools, all videos must be in sequence, first one of the tools or methods I use are met. If you want to use these instructions will be known at the recommended route. The full list and definitive and accurate tools and materials in the video description of No. 10, which is...

As the body of a ceiling pull-up bar (Part 6 of 10)

Order Zaatar Spice